







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Kitchen Remodeling: The Santa Clarita Owner’s Guide
If you have a Wellborn cabinet with a failed hinge, a drawer that drags, a warped door, or a finish that’s peeling along the bottom rail, we can match the part to your cabinet line and install it for a price that’s written down before we touch anything. A full Wellborn kitchen remodel in Santa Clarita typically runs $14,000 to $45,000, but a single cabinet part replacement is usually a fraction of that, often a few hundred dollars including labor. Most owners discover the problem the same way: a door that won’t close flush, a soft-close mechanism that gave up, or a drawer that catches every third pull. You notice it every time you reach for a plate, and after a week it’s all you see.
The good news is that Wellborn builds cabinets in standardized sizes and keeps their hardware specs consistent within each product line. That means the fix is usually straightforward for a crew that knows what to look for – the stamp on the hinge, the overlay measurement, the door profile. Graham Stein and our Santa Clarita crew have worked on Wellborn cabinets throughout the area, including kitchen remodels in Bridgeport near Town Center Drive, and we keep a range of common Wellborn-compatible hinges, slides, and touch-up materials on the truck. We’re an independent remodeling contractor, not affiliated with Wellborn, which means we can give you straight answers about whether it’s worth repairing a 20-year-old cabinet or time to plan for the full remodel.
Which Wellborn Models This Applies To

Wellborn Cabinet, Inc. is based in Ashland, Alabama, and they’ve built product lines under several series names over the decades: Wellborn Premier, Wellborn Estate, Wellborn Select, and the more recent Wellborn Closets and Wellborn Semi-Custom lines. The good news for Santa Clarita homeowners is that Wellborn has used fairly consistent hardware standards across their framed cabinet lines, which means many hinge and slide replacements cross over between series. The catch is in the door overlay and the bore pattern.
Here’s the compatibility gotcha we see most often: Wellborn doors are built as either full overlay, half overlay, or inset. A full-overlay hinge will not sit right on a half-overlay door, and forcing it will either bind the door or leave a gap at the reveal. Before you order anything, open the cabinet and look at the hinge. Wellborn typically uses either a compact 35mm cup hinge or a face-frame hinge with a specific overlay stamp, often printed right on the hinge arm. Measure the overlay with the door closed: the distance from the edge of the door to the edge of the face frame. That measurement, plus the cup bore diameter, is what we need to match the part. For drawer slides, Wellborn has used both side-mount and undermount soft-close mechanisms depending on the year and series. Undermount slides need the drawer box to have the right notch pattern cut into the back, so if a slide fails on an undermount drawer, swapping it for a side-mount is not a clean fix.
On OEM versus aftermarket: for hinges and slides, we recommend OEM Wellborn hardware when it’s available. The bore alignment and the travel feel match the rest of the kitchen, and you’re not introducing a slightly different close speed on one door in a row of six. For things like finish touch-up, edge tape, and interior shelf pins, quality aftermarket equivalents work well and save money. We’ll tell you which path makes sense for your specific cabinet line before you spend a dollar.
Styles & brands we work with







Signs Your Wellborn Kitchen Remodeling Is Failing
- Door won’t stay closed or hangs crooked. The hinge has worn or a mounting screw has stripped. On framed Wellborn cabinets, the screw seats are often shallow in the face frame, and over-tightening during a previous adjustment can wallow out the hole. A new hinge with a longer screw into solid frame material usually fixes it for good.
- Drawer catches, drags, or falls off one side. The slide has lost a bearing or the drawer box runner has separated from the cabinet wall. In Santa Clarita’s dry climate, wood drawers shrink slightly over time, and a slide that was borderline when new finally gives out.
- Soft-close no longer soft-closes. The integrated damper inside the hinge or slide has leaked its hydraulic fluid or the plastic piston has cracked. This is the single most common Wellborn part failure we see, and it’s a 15-minute swap if you have the right hinge in hand.
- Peeling or bubbling finish along the bottom rail of a base cabinet. Moisture has gotten under the finish, usually from years of mopping or a slow leak under the sink. In a Santa Clarita summer, the heat plus moisture cycle accelerates the separation. Touch-up paint won’t hold on its own; the rail needs to be stripped, sealed, and re-finished or replaced.
- Door or drawer front cracked at the corner joint. The wood joint has dried and stressed beyond the adhesive’s hold. This happens more in climate zones with wide humidity swings, and Santa Clarita’s hot, dry summers followed by cooler, damp winters put real stress on cabinet joinery over a decade or more.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For isolated part replacements on Wellborn cabinets in Santa Clarita, here’s what you can expect, parts and labor included:
- Single hinge replacement (soft-close): $45 to $95 per hinge installed
- Drawer slide replacement (pair, undermount soft-close): $140 to $260 per drawer
- Door replacement (stock Wellborn door, matched finish): $180 to $400 per door
- Drawer front replacement: $150 to $350 per front
- Finish touch-up and re-seal on rails or face frames: $95 to $300 per section
- Full Wellborn kitchen remodel: $14,000 to $45,000 for a complete Santa Clarita kitchen, depending on cabinet count, countertop selection (we install Cambria, Silestone, and Caesarstone as well), and whether walls, plumbing, or electrical move
What drives the range within any single line item is access. A hinge on an upper cabinet with clear reach is a quick job. A drawer slide on a deep base cabinet that requires removing the countertop overhang or working around a trash pullout takes longer. We give you a written price before any work starts, and the price on the paper is the price on the invoice. That goes for a $50 hinge and a $45,000 remodel equally. Every replacement carries our 365-Day Done Right Promise: if the part fails or the install isn’t right within a year, we make it right. That’s stamped on every project we do in Santa Clarita.
DIY or Call Us?
A Wellborn hinge swap is within reach for a careful homeowner with a Phillips screwdriver. The safety risk is low, and the worst outcome is a stripped screw that we can fix in 20 minutes. What we’d check yourself before calling: the hinge stamp for the overlay measurement, whether the screw holes are wallowed out, and how many doors in the kitchen show the same issue. If it’s one hinge, it’s a repair call. If it’s four hinges and two drawers across different cabinets, you’re looking at systemic wear, and it may be time to talk about a broader Wellborn kitchen remodel rather than chasing individual parts.
Where DIY goes wrong on Wellborn work is finish repair. Matching a 15-year-old cabinet finish is not a paint-store color-match situation. Wellborn has used different finishing systems over the years, and a mismatched touch-up looks worse than the original damage. The same goes for any door or drawer front replacement that needs the finish matched across a run of cabinets. And if you’re getting into base cabinet repair near a water line or under the sink, shut off the valves and check for ongoing moisture before anything else. Water damage behind a cabinet is a bigger job than the cabinet itself. For anything beyond a clean hinge swap, call us at (661) 542-4056 and we’ll look at the whole cabinet run, not just the part that failed.
FAQs

Wellborn cabinets generally last 20 to 30 years with normal use, but hardware usually needs replacement around year 10 to 15 in Santa Clarita’s dry climate, especially soft-close dampers and drawer slides. The cabinet boxes themselves often outlast the hardware by a decade, which is why repairing a Wellborn kitchen is often smarter than replacing it. Call (661) 542-4056 and we can tell you whether your kitchen is worth repairing or past saving.
Generally no. Soft-close dampers are sealed units, and once the fluid leaks or the piston cracks, the hinge is done. Slides with a lost bearing can sometimes be re-seated, but a replacement slide is cheaper than the labor to nurse along a worn one. We stock common Wellborn-compatible replacements, so the fix is usually a single visit. Call (661) 542-4056 for an exact price on your cabinet.
For hinges or slides, the swap takes 15 to 45 minutes per cabinet depending on access, and we can usually handle the job in a single visit once we’ve confirmed the hardware match. Door or drawer front replacement takes longer, since we typically order the component and schedule a finish match before installation. Call (661) 542-4056 and we’ll give you a real timeline for your specific kitchen.
We keep common Wellborn-compatible soft-close hinges, drawer slides, mounting screws, and touch-up materials on the truck for most framed Wellborn lines. If you have an inset door or an older series with unusual hardware, we’ll order the specific part and return to install once it arrives. Call (661) 542-4056 with your cabinet details and we’ll check before we come out.
Elmstead Remodeling Santa Clarita installs and services Wellborn kitchen cabinets throughout Santa Clarita, including Valencia, Saugus, Canyon Country, Newhall, and Bridgeport. We also work with KraftMaid cabinets and countertops from Cambria and Silestone. Every visit includes drop cloths on the floors, shoe covers at the door, and a photo of the clean-up before the crew leaves. Call (661) 542-4056 for a free estimate on your Wellborn cabinet repair or full kitchen remodel. A live person answers, 24/7.
Written by Graham Stein, Owner, Elmstead Remodeling Santa Clarita at Elmstead Remodeling Santa Clarita, serving Santa Clarita and nearby areas.


