







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Fence Installation: The Santa Clarita Owner’s Guide
If you have a Tremron fence product in Santa Clarita that’s leaning, separating, or has panels coming loose, we can match it, source the right components, and install them properly. A full Tremron fence installation in Santa Clarita typically runs $3,500 – $9,000 depending on linear footage, post condition, and whether we’re reusing existing concrete or pouring new footings. Most owners discover the problem the same way: a post starts tilting after heavy rain, or a bottom rail pulls away from the brick or block column it’s anchored to.
We’re an independent remodeling contractor in Santa Clarita, not a Tremron dealer or affiliate. What we are is a crew that’s spent years working around Santa Clarita’s clay-heavy soil and summer heat, and we know exactly how those two things affect fence components over time. If your Tremron panels are still sound but the installation is failing, this page tells you what to check, what it costs, and when it’s smarter to call a professional.
Key takeaways:
- Tremron fence installation in Santa Clarita: $3,500 – $9,000, written price before work starts.
- Most failures come from post movement in expansive soil or rusted anchors, not the Tremron panels themselves.
- We identify the exact Tremron product line before ordering anything so colors and dimensions match.
- Every install includes the Cedarwell Care Promise: drop cloths, shoe covers, quiet hours, and a photo of the clean-up.
Which Tremron Models This Applies To

Tremron manufactures concrete pavers, wall blocks, and related hardscape materials, and many Santa Clarita fences use Tremron columns and pilasters paired with metal or wood infill panels. The most common products we see in Santa Clarita backyards are Tremron’s StoneWall series and Pisa II wall blocks, used as structural posts or pilasters for fence sections. Some fences use full Tremron block columns with aluminum frame inserts; others use Tremron screen blocks for privacy walls along the property line.
Here’s the compatibility detail most people miss: Tremron’s block dimensions vary by product line, and a fence panel sized for one series will not seat correctly in a column built from another. The Pisa II, for example, uses a different setback and lip profile than the StoneWall series. That means if one column needs partial rebuilding, we need to confirm the exact block model before opening up the wall, otherwise you’ll end up with a visible seam or a mismatched color blend. We also check the manufacturer’s stamp on the backside of intact blocks whenever possible. For older installs from the early 2000s, that stamp may be worn or missing, and in those cases we take measurements and photos and work with local Santa Clarita masonry suppliers to find the closest current-production match.
On OEM versus aftermarket: Tremron blocks are concrete products, so there’s no functional difference between buying directly from Tremron versus a quality equivalent from a regional manufacturer, as long as dimension, compressive strength, and color blend match. We default to genuine Tremron product when the fence is recent, because matching the factory color blend is easier and the result is seamless. For discontinued colors, we’ll present an honest assessment: either a custom tint that gets close, or a full rebuild of that section so the transition is hidden. We also work with named-brand products across our remodeling work, including KraftMaid, Cambria, and Silestone, and the same principle applies here: use named materials when the match matters, and tell you exactly what we’re ordering before we order it.
Styles & brands we work with







Signs Your Tremron Fence Installation Is Failing
- Post or column leaning more than a few degrees. In Santa Clarita, clay soil expands when wet and contracts when dry. Over several seasons, a post set in undersized concrete or without proper drainage shifts. The lean usually starts small after a winter rain and worsens the next year.
- Hairline cracks running vertically through a Tremron column. This typically means the column’s internal grout or reinforcing steel has failed, or water got inside a hollow block and expanded during a freeze or extreme heat cycle. The crack is the result, not the cause.
- Gate sagging or dragging against the Tremron pilaster. The pilaster was never designed to carry the lateral load of a heavy gate, or the gate’s hinge bolts are pulling out. Left alone, the whole section tilts and the block begins to spall around the anchor points.
- Fence panels separating from the columns. In many Santa Clarita installs, panels are held into Tremron columns with expansion anchors. When the column shifts even a quarter inch, the anchor loses bite and the panel starts rattling in the wind. That rattling accelerates the anchor failure.
- White chalky residue or rust streaks below the anchors. This is moisture wicking through the block and corroding the steel hardware inside. It’s a warning sign that the connection is failing from the inside out, even if the fence looks straight.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For a typical Santa Clarita fence section using Tremron columns or pilasters, a full installation or rebuild runs $3,500 – $9,000 installed. Where your project lands depends on three things: how many linear feet we’re rebuilding, whether existing footings are sound enough to reuse or need to be re-poured, and whether the Tremron blocks themselves are cracked and need replacement or can be salvaged and re-set.
Here’s the price breakdown the way we put it in writing:
- Post or column rebuild with new concrete footing: $450 – $850 per column, including block and grout.
- Panel replacement (aluminum or wood infill re-set into columns): $120 – $280 per 6-foot section, depending on panel material.
- Full fence section rebuild with Tremron columns: $85 – $140 per linear foot for a complete tear-out and re-install.
- Gate re-hang with structural post reinforcement: $350 – $700 per gate.
Every Tremron fence installation we complete in Santa Clarita gets a written price before any work starts. That price includes parts, labor, haul-away of old materials, and the photo of the clean-up we take before the crew leaves. If you need a specific number for your fence, call (661) 542-4056 and we’ll walk the site and write it down. The price on the paper is the price on the invoice – we put that in writing before the first board goes down.
DIY or Call Us?
Some of this work is safe for a homeowner to inspect. You can check whether a panel is loose by pushing gently on it where it meets the column, and you can look for visible cracks or rust streaks. What you shouldn’t do is try to re-set a leaning Tremron column yourself. A filled block column can weigh several hundred pounds, and once it’s leaning, the load is no longer vertical. Removing it safely requires bracing the adjacent panels, supporting the gate if there is one, and understanding how the footing is bearing in Santa Clarita’s expansive clay. If the column comes down wrong, it takes part of the fence with it, and someone gets hurt. That’s not scare language. That’s just the reality of working with heavy concrete at height.
If the panel-to-column connection is loose on a straight fence, that’s a repair we can often handle in a single visit. If the column itself has moved, the fix is more involved, but it’s still routine for us. Call (661) 542-4056 and we’ll tell you over the phone which situation you’re looking at, based on what you describe and a few photos you can text over.
FAQs

A correctly installed Tremron fence in Santa Clarita should last 25 to 40 years for the block columns, with the metal or wood infill panels needing replacement or re-fastening every 10 to 20 years depending on sun exposure and moisture. The block itself is durable; what shortens the lifespan here is water intrusion and soil movement around the footings. If the original installer skimped on drainage or footing depth, you’ll see column movement within the first 5 to 10 years. Call (661) 542-4056 for an on-site assessment and a written price to put things right.
A leaning Tremron column can sometimes be re-set and re-grouted if the block is intact and the lean is under about two inches at the top, but if the block has cracked or the footing has broken apart, a partial or full rebuild of that column is the honest fix. Anything less leaves the same failure in place and buys you a few months at best. We’ll tell you which one applies to your fence after we see it. Call (661) 542-4056 for a free estimate.
For a typical section with one or two columns and a few panels, plan on two to three working days on site, including concrete cure time before the panels are re-hung. If we’re rebuilding a longer run with multiple columns, expect four to six days. We sequence the work so your gate is only out of service for a day at most, and we keep the work area clean at the end of every day. Call (661) 542-4056 and we’ll give you a schedule you can plan around.
We don’t warehouse Tremron block in bulk, because matching the exact product line and color blend means ordering for your specific fence rather than pulling from mixed inventory. What we do stock on the trucks are the installation components that fail most often: stainless and hot-dip galvanized panel anchors, post brackets, structural grout, and the drainage materials we use in every new footing in Santa Clarita. That way, once we confirm your Tremron product, the install moves without waiting on hardware. Call (661) 542-4056 and we’ll identify your product and get the right materials ordered.
If your Tremron fence is leaning, cracked, or coming apart at the connections, don’t wait for the next heavy rain to make it worse. Call Elmstead Remodeling Santa Clarita at (661) 542-4056 for a free estimate. We’ll confirm your Tremron product, write the price down before any work starts, and leave your yard cleaner than we found it.
Written by Graham Stein, Owner, Elmstead Remodeling Santa Clarita at Elmstead Remodeling Santa Clarita, serving Santa Clarita and nearby areas.


