Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Fence Installation: The Santa Clarita Owner’s Guide
Schluter fence installation in Santa Clarita typically runs between $3,500 and $9,000, and we can usually get your failed part matched and scheduled within the same week. Most homeowners we hear from in Valencia, Newhall, and Saugus discover a Schluter-compatible fence failure the same way: a post feels loose when the dog barrels into it, or a gate starts dragging on the concrete after years of Santa Clarita summer heat cycling. The good news is this isn’t a mystery part, and you don’t have to live with a wobbly fence while you figure out what broke.
Which Schluter Models This Applies To
Schluter is best known for waterproofing and tile edging systems, so when a Santa Clarita homeowner says “Schluter fence installation,” they usually mean one of two things. Either they have a fence installed with Schluter’s exterior-rated drainage and membrane products behind the cladding, or they have a Schluter-Schiene or Jolly edge profile that has failed on a gate or fence-facing elevation. Both are fixable without tearing out the entire fence line.
The compatibility detail that matters: Schluter profiles are sized in millimeters and matched to tile or panel thickness. A profile that measured 10 mm on the original install won’t accept a 12 mm panel, and the reversed version is a common source of gate binding. Before you order anything, we measure the channel width on the failed section and confirm it against the Schluter label on the strip. We stock common Schluter aluminum and stainless profiles on the truck, and we can order specialty finishes from Schluter’s standard catalog, usually arriving within a few business days. Elmstead Remodeling Santa Clarita is an independent remodeling contractor, not a Schluter affiliate, which means we’re free to tell you honestly when a quality aftermarket profile matches the original spec and when it’s worth paying for the genuine Schluter part.
Styles & brands we work with
Signs Your Schluter Fence Installation Is Failing
- Gate drags or scrapes along the bottom rail. The Schluter edge profile has shifted or worn past its tolerance tolerance. Santa Clarita’s dry heat and overnight temperature swings cause aluminum profiles to expand and contract, and over several years the fasteners can walk out of the track just enough to change the gate’s arc.
- Posts wobble when the fence is bumped. Water has found its way behind the post base, often where a Schluter drainage channel was sealed with the wrong adhesive or has a hairline crack you can’t see until we pull the cap. In Bridgeport and the newer neighborhoods near Town Center Drive, we see this on fences that sit close to sprinkler heads.
- Visible corrosion at the profile-to-cladding joint. This is almost always galvanic reaction from mixing metals, a stainless profile against an uncoated aluminum post, or vice versa. It starts as a white powder and eventually pits the metal.
- Edging pulls away from the face of the fence. The profile itself is fine, but the thinset or adhesive behind it has broken down. This is the most common repair we do, and it’s also the one most likely to come back if the substrate isn’t prepped for Santa Clarita’s UV exposure.
- The profile is bent or dented from a mower, a bike, or a hard gate swing. Aluminum doesn’t straighten well once it’s kinked. The fix is removal and replacement, not bending back.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
You should expect to pay between $3,500 and $9,000 for Schluter fence installation in Santa Clarita, and the range has less to do with our markup than with the length of fence and the condition of the underlying structure. A simple profile replacement along a 30-foot fence line runs toward the lower end. A project that requires pulling and resetting posts, correcting drainage, and replacing multiple Schluter profiles will land higher.
Every price we give includes the written line-item breakdown before any work starts: parts, labor, and the hours we expect the job to take. There is no change order that appears after the crew arrives. The price on the paper is the price on the invoice. Our work on your Schluter fence installation is covered by the 365-Day Done Right Promise, so if anything we touched fails within a year, we come back and make it right at no charge.
DIY or Call Us?
You can safely check the failed profile yourself: walk the fence line, note where the edging has separated, and take a photo of the label printed on the back of the Schluter strip. That helps us quote accurately over the phone. What we’d suggest you not do is attempt a removal with a pry bar and construction adhesive from the hardware store. The profiles sit close to the surface, and a slip gouges the cladding. When that happens, the repair cost doubles.
If the failure involves a post or a gate hinge under tension, leave it alone and call us. A gate under spring tension can move faster than you expect, and a post that’s rotted below grade won’t hold no matter what you inject into it. Call (661) 542-4056 and we’ll schedule a time to measure, identify the exact Schluter part, and give you the written price.
FAQs
A properly installed Schluter exterior profile on a Santa Clarita fence should hold for 15 to 20 years under normal conditions. The aluminum version outlasts the plastic version considerably, and profiles on south-facing lines in Valencia wear faster than shaded sections in Newhall due to direct summer sun.
Yes, if the profile is intact and only the adhesive or fasteners have failed, we can often remove, clean, and reset the same piece. If the profile itself is bent or corroded, replacement is the only reliable option. Call (661) 542-4056 and we’ll tell you which situation you have after a quick look.
Most Schluter fence installations involving profile replacement are done in one day. If posts need resetting or drainage corrections, plan for two days. We’ll include the working hours in your written estimate so you know when the crew will be in your yard.
We carry common Schluter aluminum and stainless profiles in our trucks, along with the compatible setting materials. Specialty colors and sizes are ordered from the Schluter catalog and typically arrive within three to five business days.
Written by Graham Stein, Owner, Elmstead Remodeling Santa Clarita at Elmstead Remodeling Santa Clarita, serving Santa Clarita and nearby areas.
