A Elmstead company - serving Santa Clarita, CA
An open living room and dining area after a whole-home remodel

Mr-Glass Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Clarita
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Mr-Glass Roofing: The Santa Clarita Owner’s Guide

Mr-Glass roofing parts in Santa Clarita typically run $400 – $1,800 for a repair and $8,000 – $20,000 for a full replacement, depending on the panel size, seal condition, and whether the underlayment has been compromised. Most owners discover a failed Mr-Glass part after a winter rain: a water stain on the ceiling, a drip near the skylight curb, or a panel that’s lifted at one corner after a Santa Ana wind event. We stock Mr-Glass-compatible sealants, flashings, and panel clips on the truck, and we’ll match your existing panel profile so the repair doesn’t look like a patch.

Call (661) 542-4056

We’re an independent remodeling and roofing contractor in Santa Clarita, not a Mr-Glass dealer or affiliate. That matters because we have no incentive to sell you a full replacement when a $600 flashing repair fixes the leak. Graham Stein and our crew have worked on enough Mr-Glass polycarbonate and acrylic roof systems across Valencia, Canyon Country, Saugus, and Newhall to know which parts fail first and which ones are worth salvaging.

Which Mr-Glass Models This Applies To

A dining nook with a built-in banquette

Mr-Glass manufactures glazing panels and translucent roofing systems in several profile families: corrugated, standing-seam style, and multi-wall polycarbonate. The key compatibility gotcha is the rib spacing. Mr-Glass corrugated panels come in 76mm and 100mm profiles, and a panel cut for the wrong spacing will leak at every overlap. Before ordering anything, measure the distance between rib peaks and check the panel thickness with a caliper if you have one. Most residential Mr-Glass roofs in Santa Clarita use 10mm or 16mm multi-wall polycarbonate, which handles our July heat better than thinner acrylic.

OEM Mr-Glass parts are the cleanest path when the panel is still in production. For discontinued profiles, a quality aftermarket polycarbonate panel with matching rib spacing and UV coating performs just as well, often at 20-30% less. We lean OEM for sealants and flashings because the chemistry is matched to the original glazing, but we’ll tell you plainly when an aftermarket equivalent makes more sense for your budget.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Mr-Glass Roofing Is Failing

  • Water staining at the panel seams. This usually means the overlap sealant has dried out and cracked. Santa Clarita’s dry heat accelerates sealant aging; a seam that looked fine two summers ago can be brittle enough to leak by February.
  • A panel that lifts or rattles during wind. The hold-down clips have loosened or corroded. In the Santa Ana corridors through Sand Canyon and Placerita Canyon, we see this more often than in sheltered neighborhoods.
  • Cloudiness or yellowing in the panel. The UV coating has worn through. Once the base polycarbonate starts yellowing, it’s lost impact strength and will crack under foot traffic or falling debris.
  • Condensation between multi-wall layers. The panel’s internal seal has failed. This isn’t a structural emergency, but it reduces insulation value and signals the panel is nearing the end of its service life.
  • Cracking around fastener holes. This happens when panels were over-tightened at installation or when thermal expansion wasn’t accounted for. Polycarbonate moves a lot in our temperature swings from 35°F winter nights to 110°F summer days.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled primary suite with built-in wardrobes and a window seat

In Santa Clarita, Mr-Glass roof repair ranges from $400 for a simple flashing or sealant fix to $1,800 for replacing multiple damaged panels. A full Mr-Glass roof replacement on a patio cover or walkway runs $8,000 to $20,000, driven by the panel type (10mm vs 16mm), square footage, and whether the underlayment and framing need work too. We give you a written price before any work starts; that number includes parts, labor, disposal, and cleanup. The price on the paper is the price on the invoice – we put that in writing before the first board goes down.

Every Mr-Glass repair or replacement we do includes drop cloths wherever we’re working, shoe covers at the door, a photo of the cleanup before we leave, and the 365-Day Done Right Promise: if it’s not done right, we make it right.

DIY or Call Us?

You can safely inspect your Mr-Glass roof from a ladder without walking on the panels. Look for cracked washers, lifted seams, and visible sealant gaps. Taking photos from a few angles helps us give you an honest phone read before we schedule.

What we don’t recommend is walking on Mr-Glass panels. Polycarbonate is strong, but a 10mm panel can still crack under a concentrated point load, and a fall through a roof is not the way to find out which panels are fatigued. The same goes for removing panels under tension; the clips and fasteners are load-bearing, and a panel that springs loose can take a chunk of framing with it. If the question is whether to fix it yourself or call us, call (661) 542-4056. We’ll tell you straight whether it’s a simple fix or a job for a crew.

FAQs

A remodeled staircase with wood treads and a slim metal railing

Getting started with Elmstead in Santa Clarita

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Santa Clarita team

A local crew that works across Santa Clarita and the towns around it, to the same written standard as every Elmstead location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Santa Clarita? Licensed & insured · Free on-site estimates response · free estimates
Call (661) 542-4056
Local Service Coverage

Request a Free Estimate in Santa Clarita

Tell us what you need - Elmstead Remodeling Santa Clarita responds fast. No obligation.

When you submit this form, you confirm you have read our Privacy Policy and agree that you may be contacted via phone, email, or SMS about your request, including by the independent professionals who may fulfill it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch