Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Clarita Homeowners Choose KraftMaid Construction
We provide independent KraftMaid service in Santa Clarita, which means we install, repair, reface, and remodel KraftMaid cabinetry without any factory affiliation. Our crew has worked on KraftMaid Vantage, Brexton, Novato, and Durham cabinetry in tract homes and newer subdivisions throughout the valley, and we know these cabinet lines well enough to diagnose a hinge failure or a thermofoil peel in the first ten minutes of a visit. That’s the practical difference: we speak KraftMaid’s specific language and we show up with a written price before any work starts. Call (661) 542-4056 to talk through what your kitchen needs.
Why Trust Elmstead Remodeling Santa Clarita for Your KraftMaid Construction?
We’re a Cedarwell company, and every job we take on in Santa Clarita is governed by the Cedarwell Care Promise. For KraftMaid work specifically, that matters in ways you’ll notice: shoe covers and drop cloths go down before the first tool comes off the truck, your floors stay clean, and a photo of the clean-up is taken before the crew leaves. Our technicians know KraftMaid’s modular specs, face-frame offsets, and door-overlay ratios by heart, because we’ve been installing, refacing, and repairing them in Santa Clarita kitchens for years. Graham Stein, our owner, grew up in Los Angeles and learned the fundamentals of construction at Los Angeles Trade-Technical College before spending close to two decades swinging a hammer across Southern California. For several years now, Graham and our crew have worked steadily throughout Santa Clarita, including kitchen and bathroom remodels, as a trusted General Contractor in the Bridgeport neighborhood near Town Center Drive. Graham still walks every homeowner through the sequence of work before anything gets touched, so you know what to expect about noise, dust, and how long your kitchen will be out of commission.
We’re an independent KraftMaid service provider. We’re not authorized by KraftMaid, and we don’t represent the manufacturer. What we offer instead is hard-won, hands-on knowledge of how these cabinets behave in Santa Clarita’s specific climate and housing stock.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in Santa Clarita
Santa Clarita’s hot, dry summers and hard water create a specific set of conditions that accelerate certain KraftMaid failure patterns. Here are the five problems we see most often, and the real causes behind them.
- Thermofoil delamination on slab-style doors. KraftMaid Vantage and Brexton slab doors have a thermofoil surface that bonds to the MDF core. Near ovens, dishwashers, and ranges, repeated heat cycling weakens that bond at the bottom rail and the door edges. The foil lifts, peels, or bubbles. We’ve refaced Brexton shaker doors in Valencia where oven heat had peeled the thermofoil clean off the bottom rail, and we color-matched a full refacing package rather than scrapping the boxes.
- Premature hinge cup loosening on full-overlay doors. Full-overlay KraftMaid doors carry more weight on a smaller hinge footprint. The original screws bite into the particleboard core, and over time they strip. The hinge cup starts to wobble, then the door sags. This is a matter of time in kitchens where the doors get daily use, and it’s faster in Santa Clarita because our dry air pulls moisture out of the particleboard and makes the screw holes more brittle.
- Adjustable shelf pin wear causing sagging or breakage. KraftMaid base cabinets use metal or nylon shelf pins seated in pre-drilled holes. Heavy cookware loads in the base cabinets cause the pins to deform or the holes to wallow out. We see this constantly in Santa Clarita tract homes from the 1980s and 1990s, where the original kitchen has carried decades of daily use.
- Excessive drawer glide friction on older ball-bearing slides. Dust and grease accumulate in the ball-bearing tracks over years, and the slides grind. Sometimes the soft-close mechanism still works, but the glide itself is shot. In a Valencia townhome recently, we pulled a run of KraftMaid Vantage kitchen bases where the drawer glides had ground to a halt. After measuring the exact slide length and face-frame offset, our tech swapped in a commercial-grade aftermarket soft-close kit that out-tested the OEM spec.
- Water staining and finish breakdown near the sink. Santa Clarita’s hard water leaves mineral residue that eats into the finish on KraftMaid maple and oak cabinet doors. We see dark staining at the bottom edge of sink base doors and around the dishwasher opening. This isn’t a defect in the cabinet; it’s a chemistry problem between our local water and the finish. We address it with proper sealing, refacing where needed, and a care plan that prevents the same staining from returning.
If you recognize any of these symptoms, call (661) 542-4056. Most KraftMaid issues are fixable at a fraction of what a full replacement would cost, but only if they’re caught before structural damage spreads.
KraftMaid Parts & Our Repair-vs-Replace Approach
We default to KraftMaid’s OEM hardware and touch-up kits when an exact color or overlay match is critical. When a hinge needs to look identical to its neighbor, OEM is the right call. But we also know which original KraftMaid components have short lifespans, and in those cases we’ll install better-made aftermarket hinges, glides, or shelf pins. The aftermarket soft-close glides we used in that Valencia townhome out-tested the OEM spec, and the homeowner ended up with smoother drawers than the kitchen had new.
For doors or drawer fronts with structural damage, we calculate honestly whether replacement is genuinely cheaper than a high-quality refacing that preserves the existing cabinet boxes. Sometimes replacing three doors is the smart move. Sometimes the finish damage is widespread enough that refacing the whole kitchen makes more sense. We walk through the numbers with you before you commit to either path.
We keep a local stock of common KraftMaid hinges, glides, shelf pins, and touch-up kits in our Santa Clarita inventory, which means most repairs don’t wait on a parts shipment. Call (661) 542-4056 for a written estimate on your specific repair.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We arrive on the day and at the time we agreed on. Shoe covers go on at the door. We inspect the cabinets, measure the affected components, and identify whether we’re dealing with a hinge problem, a glide problem, a finish problem, or a structural problem. We test the doors and drawers under real use before we reach for a tool.
- 2
Repair or install. We review the written estimate with you, line by line, before any work starts. If it’s a repair, we install the right OEM or aftermarket part, adjust the doors and drawers, and test the operation. If it’s an install or refacing, drop cloths protect the floors, quiet tools are used during family rest hours, and pet-safe products are selected where there’s a choice.
- 3
Test. Every door opens and closes, every drawer glides, every hinge is adjusted, and every finish match is checked under your kitchen’s actual lighting. We don’t pack up until the work passes our own inspection.
- 4
Warranty. Every project is covered by our 365-Day Done Right Promise. If it’s not done right after the job is complete, we make it right. That’s stamped on every project, and it applies to KraftMaid work just like everything else we do.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Santa Clarita
We service and install KraftMaid Vantage, Brexton, Novato, and Durham cabinetry across Santa Clarita, from the hillside lots in Canyon Country to the newer subdivisions in Valencia and Saugus, and we also offer KraftMaid in Chatsworth. That includes base cabinets, wall cabinets, pantry units, island cabinetry, and modular components from big-box retailers. Many Santa Clarita kitchens use KraftMaid’s modular cabinet system, and we’re familiar with how those pre-assembled units behave differently than custom-built boxes. We also handle cabinet installation and refacing, kitchen design and layout, and full kitchen remodeling. Our local stock includes common KraftMaid hinges, ball-bearing glides, shelf pins, and touch-up kits so most repairs don’t wait on shipping.
We Also Service These Brands
While KraftMaid is a cabinet line we know deeply, we’re not a single-brand shop. Our Santa Clarita kitchen and bath work also includes Cambria and Silestone countertops, Kohler and Toto fixtures, and full remodels that pull together multiple named brands whose warranties you can verify independently. If your kitchen has KraftMaid cabinets and a Cambria countertop, we service both.
FAQs – KraftMaid Construction Service in Santa Clarita
No. We are an independent KraftMaid service provider with extensive hands-on experience installing, repairing, and refacing KraftMaid cabinetry across Santa Clarita, but we have no factory affiliation or authorization. We work with OEM parts where it matters and better-made aftermarket parts where the original components have known weaknesses.
Yes. Refacing keeps your existing cabinet boxes in place and replaces the doors, drawer fronts, and veneer surfaces. We’ve done this throughout Santa Clarita, including on Brexton shaker and Vantage slab doors, and it’s usually faster and less disruptive than a full cabinet tear-out. Call (661) 542-4056 to get a written estimate for your kitchen.
In most cases, yes. The original KraftMaid full-overlay hinge cups are prone to loosening when the screws strip the particleboard core behind them. We remove the damaged hardware, repair the stripped material, and install a commercial-grade aftermarket hinge that handles the full-overlay weight better than the OEM part. This typically resolves the recurring failure. Call (661) 542-4056 and we’ll assess your hinges.
We install KraftMaid modular cabinets, including Vantage, Brexton, Novato, and Durham lines purchased from big-box retailers. We also design and build full kitchen layouts from scratch when the project calls for it. The right approach depends on your existing layout, your budget, and how long you plan to stay in the home.
Santa Clarita’s hard water is the usual culprit. Mineral residue and repeated exposure to water vapor penetrate the finish on maple doors, especially at the bottom edge of the sink base and around the dishwasher opening. We address this with proper cleaning, repair of the damaged finish, and sealing that prevents the same staining from returning. Early treatment makes a real difference in the outcome.
KraftMaid cabinet installation in Santa Clarita typically runs $4,000 to $13,000, while a full kitchen remodel starts at $14,000 and can reach $45,000 depending on cabinet count, layout changes, countertops, and finish work. Here are the precise ranges for the KraftMaid work we handle:
| Project Type | Santa Clarita Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Every estimate is written before any work starts, and the price on the paper is the price on the invoice. Call (661) 542-4056 for an exact quote on your KraftMaid project, estimates are free.
Book Your KraftMaid Service in Santa Clarita, CA
We provide independent KraftMaid construction service across Santa Clarita. If your KraftMaid cabinets need repair, refacing, or a full remodel, call (661) 542-4056 to schedule a free written estimate. A live person answers the phone, and the crew shows up with a plan.
Written by Graham Stein, Owner at Elmstead Remodeling Santa Clarita, serving Santa Clarita since 2005.
