Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Fence Installation: The Santa Clarita Owner’s Guide
Boral fence installation in Santa Clarita typically runs $3,500 – $9,000 for a full run, with repairs to failed sections or posts falling between $400 and $1,800 depending on how many feet are involved and what the soil looks like once we dig. We stock Boral-compatible post brackets, rails, and fasteners on the truck, so most repairs get done in a single visit.
Most homeowners figure out something is wrong the same way: a gate starts dragging, a post leans after a heavy wind, or a panel cracks along the bottom edge where sprinkler water has been hitting it for years. Boral is a steel-reinforced composite fence system designed to hold up in dry, hot climates like ours, but the hardware and sometimes the bottom rails bear the brunt of Santa Clarita’s alkaline soil and seasonal ground movement. You call us when the fence is still standing but something is clearly off, and you want it handled before the whole run starts to shift.
Which Boral Models This Applies To
Boral manufactures its steel-reinforced fence system as full kits and as individual replacement parts. The main compatibility issue to watch is the rail profile. Boral uses a specific C-channel rail that seats into routed posts, and the rail depth has changed slightly across production years, so a rail from a 2012 kit will not always seat cleanly into a 2020 post. When you call, we’ll ask you to check the inside face of the post for a small stamped code or molded part number. If that’s worn off, we measure the rail channel width with calipers before we order anything.
You can buy genuine Boral replacement parts through their dealer network, and those match exactly. There are also quality aftermarket composite rails and post brackets that install cleanly into Boral posts because they’re milled to the same channel dimension. For structural posts and top caps, we recommend genuine Boral. For fence panel facing boards, a quality composite aftermarket board will hold up just as well in Santa Clarita sun and cost less. We’re an independent service provider, not a Boral dealer, so we’ll tell you which part makes sense to spend OEM money on and which one doesn’t.
Styles & brands we work with
Signs Your Boral Fence Installation Is Failing
- Gate drags or won’t latch. The post has shifted out of plumb, usually because the concrete footing wasn’t deep enough, or the soil around the post has eroded from irrigation runoff. You’ll see daylight between the gate and the post before it gets this bad.
- Panels rattle in the wind. The rail-to-post connection has loosened. Boral uses a pressure-fit channel system, and once the rail sits loose, wind vibration works it further out. On Santa Clarita’s windy afternoons, a loose rail will ruin the post channel within a season.
- Rust streaks below the post caps. The internal steel reinforcing is wicking moisture up an uncapped or cracked post. On a properly capped Boral post you should never see rust. When you do, it means water got in and the steel core is corroding from the inside out.
- Bottom rail soft or splitting. Lawn sprinklers aimed at the fence line are the usual culprit. Composite doesn’t rot, but repeated soak-dry cycles in our hard water will break down the resin or separate the rail from the bracket over three to five years.
- Post leans after rain. Santa Clarita has expansive clay soil in parts of Newhall, Canyon Country, and Valencia. After heavy winter rain, the clay swells and can lift or tilt a shallow post footing. If the post is moving more than an inch, the footing needs to be redone, not just shimmed.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Santa Clarita, replacing a failed Boral fence section runs $400 – $1,800 including labor, new rails, brackets, screws, and disposal of the old material. A full 100-foot run with new Boral posts, rails, and facing sits in the $3,500 – $9,000 range depending on gate hardware, terrain, and whether we’re pulling an old fence line out of concrete footings first. If your Boral posts are in good shape but panels or rails are failing, we can often rebuild onto the existing posts and cut the material cost substantially.
| Scope of Work | Typical Santa Clarita Range |
|---|---|
| Replace 1 – 2 failed Boral rails or panels | $400 – $900 |
| Reset one leaning Boral post (new footing) | $300 – $700 |
| Full Boral fence run (50 – 60 ft) | $2,500 – $5,500 |
| Full Boral fence run (80 – 100 ft) | $3,500 – $9,000 |
Every quote is written before any work starts, so the price you see on paper is the price on the invoice. Graham Stein reviews each Boral job himself before we order parts, and the work carries the 365-Day Done Right Promise: if something we installed doesn’t hold up within a year, we come back and make it right at no charge.
DIY or Call Us?
There are a couple of things you can safely check yourself. Look at the post caps, see if any are cracked or missing. Walk the line and give each panel a firm push at the top corner, a healthy Boral panel barely moves. Look for sprinkler heads that spray directly onto the bottom rail and adjust them out. Those checks are free and useful.
What we’d rather you not do is pull a post out of its footing. Boral posts are heavy, the steel core makes the post top-heavy once it’s loose, and the footing hole is deeper than most homeowners expect. Lifting one out by hand is how people wrench their backs or crack a neighboring panel. If the post or rail is beyond saving, or the gate is binding, call us at (661) 542-4056. We’ll come out, measure it, price it, and give you the honest answer on repair versus replace before anything is ordered.
FAQs
A properly installed Boral fence should give you 20 – 30 years in Santa Clarita’s climate. The posts and panels are steel-reinforced composite, so the failure points are almost always the hardware, the footings, or sprinkler saturation, not the material itself. Call (661) 542-4056 and we’ll tell you which one is your problem.
Often yes. If the post itself is solid and the lean is under about two inches, we can sometimes straighten and re-set it with a deeper, wider footing. If the steel core has rusted or the post base is cracked, replacement is the right call. We’ll tell you straight which one yours needs.
Replacing rails or resetting a single post takes one visit, usually four to six hours. A full fence line takes one to three days depending on length and whether we’re removing old fencing. We’ll walk you through the sequence before the crew starts, so you know which days we’re on site and what time we’ll be out of your driveway.
We keep Boral-compatible rails, post brackets, stainless screws, and post caps on the truck for common sizes and profiles. For full genuine Boral posts or color-matched panels, we order those on a per-job basis from the supply house in the Santa Clarita Valley, usually a wait of one to three days. If you need it matched exactly, we’ll pull a part number or measurement first and verify it before ordering.
Call (661) 542-4056 for a free estimate on your Boral fence repair or replacement. A live person answers, you’ll get a written price before any work starts, and the crew will leave your yard cleaner than they found it. We serve Santa Clarita, Valencia, Newhall, Canyon Country, Saugus, and the surrounding areas.
Written by Graham Stein, Owner, Elmstead Remodeling Santa Clarita at Elmstead Remodeling Santa Clarita, serving Santa Clarita and nearby areas.
